610mm EPR Self-Fusing Rubber Jumbo Rolls | 35kV Manufacturer Grade
High voltage self fusing rubber tape 610mm width
Scale your production with Liantu® semi-finished EPR rubber jumbo rolls. 610mm width, optimized for high-speed slitting machines. Superior liner release, 35kV dielectric strength, and consistent 0.76mm gauge.
Self fusing rubber tape is a non-tacky tape which when stretched and wrapped around cables, electrical joints, hoses and pipes will amalgamate itself into a strong seamless rubbery, waterproof, and electrically insulating layer, resistant high voltage.
The "Converter's Nightmare" vs. The Liantu B2B Solution
In the tape slitting business, your profit margin depends on the quality of your raw material. We eliminated the variables.
| The Manufacturing Pain Point (Converter Fears) | The Liantu Engineering (Our B2B Solution) |
|---|---|
| "Liner-Lock" Failure: Low-quality jumbo rolls often have liners that stick to the rubber, causing machine jams and 20% waste during the slitting process. | Precision Siliconized Release: Our 610mm rolls feature a premium treated liner that ensures a "zero-drag" release. Even on high-speed slitting lines, the liner peels cleanly, maximizing your yield and protecting your equipment. |
| "The Center-Sag" Issue: Soft rubber jumbo rolls often sag or deform during shipping, making it impossible to achieve a straight cut on a lathe slitter. | Reinforced Core & Tension Control: Every Liantu jumbo roll is wound on a high-crush-strength 3-inch core with precision tensioning. The roll remains perfectly cylindrical from our factory to your slitting table. |
| "Chemical Inconsistency": Variations in the EPR formula mean one roll fuses perfectly while the next one doesn't, leading to customer complaints and returns. | ISO-Batch Certification: We manufacture our EPR (Ethylene Propylene Rubber) in controlled batches. Every jumbo roll comes with a TDS (Technical Data Sheet) guaranteeing the same dielectric and fusion properties every time. |
| "Telescoping" Rolls: Poor winding causes rolls to "telescope" (push out sideways), ruining the alignment of your custom-width finished products. | Edge-Flush Winding: Our 610mm rolls are wound with a ±1mm edge tolerance. You get a perfectly flat face for easy alignment and consistent finished roll widths (19mm, 25mm, 50mm, etc.). |
ROI Logic: Why Buy Semi-Finished from Liantu?
The "Manufacturer-to-Manufacturer" Advantage.
Finished Goods Inventory ($$): High storage cost, fixed widths, and lower margins.
Liantu 610mm Jumbo Rolls ($): Lower unit cost, zero warehouse waste, and the flexibility to offer any width your customer demands (from 10mm to 610mm). Result: 30% Higher Profit Margins.
Technical Specifications (Converter Data)
The data your Production Manager needs to calibrate the machines.
| Property | Value | Why it matters for Slitting/Converting? |
|---|---|---|
| Base Material | Ethylene Propylene Rubber (EPR) | High-grade polymer for 35kV applications. |
| Width | 610mm (Standard) | Optimized for maximum yield on standard 24-inch lathes. |
| Standard Thickness | 0.76mm (Customizable) | Consistent gauge ensures uniform finished roll diameters. |
| Liner Type | Polyethylene (PE) or Polyester (PET) | High-strength liner that won't snap during high-speed winding. |
| Dielectric Strength | ≥25kV/mm≥25kV/mm | Maintains 35kV performance across the entire 610mm span. |
| Fusion Rate | < 1 Minute (Amalgamation) | Superior molecular link even in semi-finished state. |
Expert Insight: Optimizing for High-Yield Slitting
[Liantu Production Lab] When converting our 610mm jumbo rolls, the Temperature and Blade Speed are critical.
Lathe Slitting: For clean, "mirror-finish" roll edges, we recommend a high-speed circular blade with a silicon lubricant mist. This prevents the rubber from "heating up" and sticking to the blade.
Rewind Slitting: Because our EPR is highly elastic, keep the rewinding tension low. If wound too tight, the finished rolls may "shrink" or "cone" after a few days.
Storage: Keep jumbo rolls vertical in their original suspension packaging to avoid "flat spots" on the rubber, which can cause thickness variations in your finished product.
FAQ (Addressing Global B2B Logistics)
Q: What is the lead time for a full container of jumbo rolls?
A: We maintain a buffer stock of 610mm EPR rolls. Standard lead time for 20ft FCL is 10-15 days from deposit.
Q: Can we order different thicknesses (e.g., 0.5mm or 1.0mm)?
A: Yes. As a primary manufacturer, we can adjust the extrusion die to provide custom thicknesses for your specific market needs.
Q: How are the rolls protected for sea freight?
A: Every jumbo roll is suspended in a heavy-duty "Cradle Box" with end-caps. This ensures the rubber never touches the box walls, preventing pressure marks during the 4-week transit.
We can offer jumbo roll self fusing tape, with the width is 610mm, you can take the jumbo rolls to your factory, wrapping into small rolls and cutting and packing according to request size.
This tape feature:
1.Highly conformable for high voltage resistant
2.Physical and electrical properties are unaffected by the degree of stretch
3.Can be stretched up to 800% to make void free
4.Moisture resistant insulation self amalgamating tape
5.Excellent electrical properties
Size we offer;
610mmx0.76mmx9.14m
610mmx0.76mmx10m
Packing: 2pcs packing in a carton box
Liantu, one of the leading manufacturers and suppliers in China, offers you not only high quality high voltage self fusing rubber tape 610mm width at the best price, but also excellent additional services. Welcome to wholesale customized tapes made in China from our factory.
Hot Tags: 610mm EPR Self-Fusing Rubber Jumbo Rolls | 35kV Manufacturer Grade suppliers China, manufacturers, factory, wholesale, customized, price, made in China
Next
No InformationYou Might Also Like
Send Inquiry























