Floor marking tape storage and maintenance methods have the following points:
1. Do not allow the tape to go serpentine or creep. To maintain the drag roller, the vertical roller should be flexible and the tension should be moderate. Electrical tape
2. It is not allowed to use different types, different specifications, strength, and number of layers of tapes for connection.
3. The diameter of the conveyor roller diameter and the minimum pulley diameter of the conveyor belt should comply with the relevant regulations.
4, the type of tape, specifications should be based on the use of needs and specific conditions, a reasonable selection.
5. When the tape is found to have early damage during use, it should be promptly searched for causes and repairs to avoid the occurrence of adverse consequences.
6, the best use of conveyor joints with hot vulcanized adhesive to improve reliability and maintain a higher effective strength.
7. Cleanliness is the basic condition for the good operation of the tape. Foreign substances can affect the eccentricity of the tape, the difference in tension, and even breakage.
8, tape should be stored in the warehouse, to avoid the sun, rain; prohibit the contact with organic and organic oils, keep clean and dry, away from the discovery device 1m, room temperature between -15 °C ~ 40 °C.
9. When the conveyor is equipped with a baffle and a cleaning device, wear on the tape should be avoided.
10. When loading and unloading the conveyor belt, it is best to use a crane, and use a rigging with a beam to lift it up smoothly to avoid damaging the belt edge.
11, the tape should be placed in a roll, not folded, storage time should be turned once every quarter.
