-Silicone rubber self-adhesive has good protection and insulation properties, it is not sticky, so when you remove it, it will not leave viscosity. It dissolves quickly and can be corrected within 24 hours.
—It is an excellent insulation, with a dielectric strength above 400 VPM.
—Withstand voltage higher than 700 PSI (49 bars).
—The working temperature range of silicone rubber self-adhesive tape: -60° Cto +200° C (continuous), -65° Cto +260° C (intermittent), and the instantaneous temperature can reach -70° Cto +600° C.
—600% elongation, it can be extended and wound on a variety of different surfaces, and there will be no cracks or looseness when expanding or shrinking.
—Silicone rubber self-adhesive tape can resist burning, oil, acid, solvent, salt water, paving salt and ultraviolet rays.
—Silicone rubber self-adhesive has a variety of different colors, such as red, black, iron red, blue, gray, yellow, white, transparent, translucent, etc., as well as night-light type, temperature-sensitive type, etc.
use
car
It is not affected by fuels, oils, solvents, acids and ultraviolet rays. It is suitable for the repair of automobile electricity, because it can isolate 7000 volts. It can be used for radiator hoses, fuel pipes, air hoses, air conditioning lines, exhaust gas and temporary fan belt maintenance.
Marine
It can be applied to 500 meters underwater.
Home repair
It can be used for dishwasher hoses, washing machine drain hoses, leaky S-tubes, broken drain hoses, separate vacuum cleaner hoses and crawling hoses due to its flexibility. It can also be used in tools and sports.
For the best results, please follow the instructions below:
Pressure repair
Radiator hoses, water pipes, air pipes, gas pipes, etc.
Application: The tape should be quickly stretched and tightly wrapped.
Non-pressure repair
Wire and cable insulation repair and tools.
Application: Pull the gods gently, as long as you want to pack ordinary tape.
Repositioning tape
After the tape is used, if you want to reposition it, please remove the tape and reuse it within 20 seconds.
Winding
Start winding the tape on any side of 3 to 4 cm from the place where repairs are needed, and wind the tape for 3 to 4 non-pressure repairs and 6 to 7 pressure repairs. Ensure that the tape reaches the highest extension at any time.
