The butyl rubber waterproof sealing and bonding tape is made by blending butyl rubber and polyisobutylene and other main raw materials, according to a special production formula, using the latest patented technology, selecting high-quality special polymer materials, and producing through a special process Environmentally friendly solvent-free sealing and bonding material.
Product featuresedit
(1) Excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extension properties, and strong adaptability to interface deformation and cracking.
(2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance.
(3) Reliable application performance: its adhesion, water resistance, airtightness, low temperature resistance and followability are good, and its dimensional stability is good.
(4) Simple construction and operation technology
Scope of applicationedit
(1) Waterproof treatment of roof waterproofing, underground waterproofing, structural construction joints and lap joint sealing of polymer waterproofing membranes for newly built projects.
(2) Seal and waterproof treatment of construction joints of subway tunnel structure in municipal engineering.
(3) Airtight, waterproof and shock absorption at the joints of the color profiled plates. Airtightness, waterproofing and shock absorption of the joints in the sun panel project.
(4) Bonding and sealing treatment in automobile assembly.
(5) Waterproof sealing treatment at the joints during the construction of steel structure.
(6) The butyl tape of composite aluminum foil is suitable for waterproof sealing of various civil roofs, color steel, steel structures, waterproof coils, PC boards, etc. under sunlight..
Construction regulations
General
(1) This regulation is applicable to civil structural roofs and metal plate surfaces that use tape as supporting materials for waterproofing membrane bonding, metal profiled board bonding, PC board bonding, etc.
The sealing and waterproofing works.
(2) When designing or using tape, it should be carried out in accordance with relevant regulations or with reference to our company's corporate standards.
General provisions
(1) It needs to be constructed in the temperature range of -15°C—45°C (appropriate measures should be taken when the temperature exceeds the specified temperature range)
(2) The surface of the base layer must be cleaned or wiped clean, kept dry, free of floating soil and oil.
(3) The bonding area cannot be torn or peeled within 24 hours after construction.
(4) Choose Yongxing tapes of different models and sizes according to actual engineering needs.
(5) Put the boxes about 10cm away from the ground. Do not stack them more than 5 boxes.
Construction tools
Cleaning tools, scissors, pressure roller, wallpaper knife, etc.
Requirements
(1) The bonding base is clean and free of oil, dirt, water, and moisture.
(2) In order to ensure the bonding strength, the base surface temperature is above 5°C, and the special low temperature environment can be specially produced.
(3) When using, uncover the tape paper one round before use.
(4) Do not use it at the same time with waterproof materials containing organic substances such as benzene, toluene, methanol, ethylene, and silica gel.
Process characteristics
(1) The construction is convenient and quick. The construction with Yongxing tape should be bonded in place at one time, and the surface of the base layer should be clean.
(2) Wide construction environment requirements. The ambient temperature is -15°C—45°C, and the humidity is below 80°C, which can be constructed normally, and has strong environmental adaptability.
(3) The repair process is simple and reliable. You only need to use single-sided tape for large leaks.
Related product editor
Butyl waterproof sealing tape
(1) Excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extension properties, and strong adaptability to interface deformation and cracking.
(2) Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance.
(3) Reliable application performance: its adhesion, water resistance, airtightness, low temperature resistance and followability are good, and its dimensional stability is good.
(4) Simple construction and operation technology
