The warning tape has the advantages of waterproof, moisture-proof, weather-resistant, corrosion-resistant, anti-static, etc., and is suitable for the anti-corrosion protection of underground pipelines such as air pipes, water pipes, and oil pipelines.
Caution tape use instructions
When the marking tape is used as a zone division, it is called a marking tape or a zone tape; when it is used as a warning, it is called a warning tape. But in fact both are the same thing. When it is used for regional division, there is currently no relevant standard or conventional saying that specifies what color should be used to divide a region. Green, yellow, blue, and white are commonly used. When used as a warning, according to GB 2893-2001 "Safety Color" and the "Workplace Occupational Disease Hazard Warning Sign" issued by the Ministry of Health in 2003, single-color red, yellow, green and dual-color red, white, green and white Both yellow and black can be used as warning lines. Here, we suggest to make a distinction between marking tape and warning tape. White, yellow, and green are used for marking; red, red, white, green, white, and yellow and black are used for warning.
When used as a warning, red means prohibition and prevention; red and white stripes mean that people are prohibited from entering dangerous environments; yellow and black stripes mean to remind people to pay special attention; green and white stripes mean more eye-catching Remind people.
Warning tape storage and maintenance
1. Adhesive tape should be stored in the warehouse to avoid sunlight and rain; no contact with acid-base oil and organic solvents, keep it clean and dry, 1m away from the discovery device, the room temperature is between -15℃~40℃.
2. Adhesive tape should be placed in rolls, not folded, and should be turned over once a quarter when stored for a long time.
3. When loading and unloading the conveyor belt, it is best to use a crane, and use a rigging with a beam to hoist it smoothly to avoid damaging the belt edges, and do not load and unload arbitrarily, which may cause loose rolls and loose sleeves.
4. The type and specifications of the tape should be selected reasonably according to the use needs and specific conditions.
5. It is not allowed to use tapes of different varieties, specifications, strengths, and cloth layers together (matching groups).
6. It is better to use thermal vulcanization bonding for conveyor belt joints to improve reliability and maintain high effective strength.
7. The diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt should meet the relevant regulations.
8. Don't make the tape snake or creep, keep the drag roller, the vertical roller flexible, and the tension should be moderate.
9. When the conveyor is equipped with baffles and cleaning devices, the abrasion of the tape should be avoided.
10. Cleanliness is the basic condition for the tape to run well. Foreign matter will affect the eccentricity, tension difference, and even breakage of the tape.
11. When the tape is found to have early damage during use, the cause should be found and repaired in time to avoid adverse consequences.
Shijiazhuang LIANTU Import and Export Trade Co., Ltd. specializes in the production of warning tape, identification tape, floor tape
