1. 1500 lead-free electrical insulation tape; size: 18mm×10m×0.13mm; color: black; voltage level: 600V and below; dielectric strength: >39.37KV/mm (1000v/mil).
2. 1600 lead-free electrical insulation tape; standard (width×length×thickness): 18mm×20m×0.15mm; color: black; temperature rating: 80°C (176°F); thickness: 6mils; voltage rating below 600V; dielectric Intensity>39.37kv/mm (1000v/mil); insulation resistance>10^12 ohm.
3. Purpose of electrical tape 1300: It is suitable for insulation coating of various industrial wires, easy to tear and wrap around. Temperature rating: 0°c-80°c Voltage rating: below 600v.
The main purpose
Surrounding wires and cables, waterproof and insulation maintenance
Suitable for insulation of various resistance parts. Such as the surrounding of wire joints, the correction of insulation damage, the insulation protection of various motors and electronic parts such as transformers, motors, capacitors, and regulators. It can also be used for binding, fixing, overlapping, repairing, sealing, and maintenance in industrial processes.
use
Power cord connectors are divided into "ten" word connection, "one" word connection, "D" word connection and so on. The joints should be tightly wound, lubricated and free of thorns. Before disconnecting the thread, you should press it lightly with the wire pliers, then wrap around to the mouth, and then swing left and right, the thread will be disconnected at the joint. If the joint is in a dry place, it should be wrapped with two layers of insulating black cloth, then two layers of plastic tape (also called PVC adhesive tape), and then two or three layers with J-10 insulating self-adhesive tape stretched by about 200%. Z is finally wrapped with two layers of plastic tape. The direct use of plastic tape has many shortcomings: the plastic tape tends to be misplaced and open for a long time; when the electrical load is heavy, the joints will heat up, and the plastic electrical tape will melt and shorten; the power connectors are pressed against each other in the junction box and the joints have burrs. It is very simple to puncture the plastic tape, etc. These dangers directly endanger personal safety, cause the line to be moderate, and cause a fire.
The use of insulating black tape will not show the above situation. It has a certain strength and flexibility, can tightly wrap the joints for a long time, is dry and fixed under the influence of time and temperature, will not fall, and is flame-retardant. Furthermore, it can prevent moisture and rust by wrapping it with insulating black tape and then wrapping it with tape.
However, the insulating self-adhesive tape also has shortcomings. Although it has good waterproof function, it is easy to break. Therefore, Z needs to be wrapped with two layers of plastic tape as a maintenance layer. Learn how to use electrical tape and use it correctly to avoid leakage and reduce damage.
